Punching Printing Knowledge
Punching

Press Punching | Bindery Punching | Punching Specifications


Press Punching

Promotional Mailers and Cut Sheet Self Mailers

Press punched file holes are punched on a web press as the mailers are being printed.

  • Standard configurations are:
         - two holes, 2 3/4" center to center, top or bottom of the sheet.
         - three holes, 4 1/4" center to center on the left side of the sheet.
  • Configurations other than standard may have restrictions so consult your supplier.
  • Press punching is less expensive than bindery punching on larger runs due to the efficiency of punching on the press as the product is being printed.

 
Continuous Self Mailers and Continuous Multiple Part Mailers

File holes on continuous mailers must be punched on a web press as the mailers are printed.

  • Standard configurations are:
         - two holes, 2 3/4" center to center, top or bottom of the form.
         - three holes, 4 1/4" center to center on the left side of the form
  • Configurations other than standard may have restrictions so consult your supplier.
  • Continuous mailers cannot be bindery punched. 

 

Bindery Punching

Promotional Mailers and Cut Sheet Self Mailers

Bindery punched file holes are punched as a secondary or "off-line" operation in the bindery department.

  • The standard configurations are the same as for the press punching.
  • There are no restrictions on non-standard punching configurations.
  • Bindery punching is more expensive on longer runs due to the labor involved in being an offline operation.

 

Punching Specifications

Promotional Mailers and Cut Sheet Self Mailers
 

 
Specifications needed by your supplier:

Number of holes - Diameter size of hole
Center to center measurement from hole to hole - Location

Example: 3 holes - 1/4" Dia. - 4 1/4" center to center at left

Also indicate if the holes are parallel to the depth or parallel to the width.

 
 
Continuous Self Mailers and Continuous Multiple Part Mailers
 

Width

Width

             

Running parallel
to depth

Running parallel
to width

 
Specifications needed by your supplier:

Number of holes - Diameter size of hole
Center to center measurement from hole to hole - Location

Example: 3 holes - 1/4" Dia. - 4 1/4" center to center at left

Also indicate if the holes are parallel to the depth or parallel to the width.

 


Back to Top

More Mailers >>

Additional search results for:
   Punching
knowledge
Punching
Punching
Punching
Punching
Punching
Punching
Punching
glossary
Marginal Punching
File Hole Punching
Bindery Punching
Search
Enter keywords to search
PrintingTips.Com Knowledge
Print Preparation
Print Products
Continuous Products
Direct Mail
Envelopes
Integrated and Affixed
Labels
Laser Sheets
Mailers
Continuous Mailers - Construction
Promotional Mailers - Construction
Self Mailers - Construction
Size
Design Features
Paper
Types of Mailers
Ink
Perforations
Punching
Numbering
Packaging
Storage
Single Sheet Products
Unit Sets
RelatedContent
knowledge
glossary
Features of Interest
Featured Ad
Terms of Use |  Privacy Policy |  Site Map |  Index |  Contact Us
Reproduction in whole or in part without written permission is strictly prohibited.
© Copyright 2024 Tecstra Systems, All Rights Reserved, PrintingTips.Com

Punching - PrintingTips.com

Printing Tips Home Customer Service Knowledge Glossary Printing Tips Home