Knowledge - PrintingTips.com
Punching

Press Punching

When press punching, file holes are punched on a web press as the forms are being printed.

  • Standard configurations are:
    • Two holes, 2 3/4" center to center top or bottom of form
    • Three holes, 4 1/4" center to center on left side of form
  • Configurations other than standard may have restrictions - consult your supplier.
  • Less expensive on larger runs due to efficiency of punching on the press as the form is being printed.

Bindery Punching

When bindery punching, file holes are punched as a secondary operation in the bindery department.

  • Standard configurations are the same as for press punching.
  • There are no restrictions on non-standard configurations when using bindery punching.
  • Bindery punching is more expensive on longer run quantities due to it being an offline operation.
  • There may be more problems with sheets sticking together in the paper tray when printing through the laser printer.
     

Punching Specifications

 
Specifications needed by your supplier:

Number of holes - Diameter size of hole 
Center to center measurement from hole to hole - Position

Example: 3 holes - 1/4" Dia. - 4 1/4" center to center - at left

Also indicate if the holes are parallel to the depth or parallel to the width.
 

Note: File hole punching may cause problems when running the laser forms through the printer. Keep the number of holes to a minimum.

 


Back to Top

More Laser Sheets >>
Search
Enter keywords to search
PrintingTips.Com Knowledge
Print Preparation
Print Products
Continuous Products
Direct Mail
Envelopes
Integrated and Affixed
Labels
Laser Sheets
Mailers
Single Sheet Products
Unit Sets
Features of Interest
Featured Ad
Terms of Use |  Privacy Policy |  Site Map |  Index |  Contact Us
Reproduction in whole or in part without written permission is strictly prohibited.
Copyright 2014 Tecstra Systems, All Rights Reserved, PrintingTips.Com

Knowledge and printing advice brought to you by PrintingTips.com

Printing Tips Home Customer Service Knowledge Glossary Printing Tips Home